After the wire drawing machine is equipped with a mold, according to the requirements of the mold, the diameter of the aluminum wire should be reduced so that the wire diameter can be smoothly passed through the mold.
In the mother seat of a No. 1 wire drawing machine, the other end of the wire drawing rope is hung on the small hole of the wire drawing pot, and the foot switch is activated to make the wire drawing pot move.
After drawing several laps, remove the lead pliers, and then start the No. 1 machine, so that there are more than half of the semi-finished wire drawing on the No. 1 machine's wire drawing pan, and then introduce the aluminum thread end to the No. 2 machine through the hanging wheel and the threading wheel.
