Intermediate Wire Drawing Machine

Intermediate Wire Drawing Machine is used for drawing and annealing pure copper wire from 2.6-3.0mm to 0.8-1.6mm.

Main Specifications

Machine Characteristic

1. Driven by high precise helical gears.

2. Particular oil lubrication mechanism

3. The capstan and die lubrication system is in emulsion spraying with force from inside of die holders design

4. Intermediate Wire Drawing Machine with special gear ratio and mechanical reduction ratio which is suitable for brass wire.

Causes of wire surface oxidation when running the Intermediate Wire Drawing Machine :

1. The temperature of the cooling water in the sealing chamber is too high, exceeding 40 °C, so the sealing chamber cannot achieve the required cooling effect on the wire.

As a result, the temperature of the wire is still very high after annealing, and it is oxidized when it encounters oxygen in the air at a high temperature.

2. When operating the Intermediate Wire Drawing Machine, the content of the cooling liquid in the sealing chamber is not enough, which will increase the friction between the wire and each guide wheel, and then increase the temperature of the wire again, causing the surface of the wire to oxidize.

3. The water pressure and water volume of the cooling water in the sealed chamber are not enough so the wire cannot achieve a satisfactory cooling effect.

Application Field

Wire processing and manufacturing industry, wire and cable industry.

Machine Guarantee

12 months from the date of loading, except for easy wearing parts and the seller will not guarantee the period due to buyer's misuse of the machine.

Hot Tags: intermediate wire drawing machine, China, suppliers, manufacturers, factory, customized, pricelist, for sale, made in China, Intermediate Wire Drawing Machine, Rod Breakdown Machine, Electric Wire Drawing Machine, Rod Breakdown Drawing Machine, Fine Wire Drawing Machine with Continuous Annealing, EDM Brass Wire Drawing Machine