1. Cleaning the machine:
Clean both the inside and outside of the wire drawing machine, and wipe out the Copper powder or Aluminum powder.
Clean the air filter of the electric control box and the lubrication oil filter.
2. Rust treatment:
Anti-rust treatment for wire drawing machines can help avoid costly repairs in the future. Apply anti-rust oil to some parts of the wire drawing machine,for example, inside the machine body, die, holder, edge of the capstan, take-up shaft, etc, to prevent rusting.
3. Drainage and exhaust treatment:
The water and gas in the pneumatic three-piece oil filter tank are discharged by the drainage switch to avoid freezing due to the cold weather. If not used for a long time, then drain the emulsion, and thoroughly clean up the impurities in the recycle water tank.
4. Power off when not in use
Powering off the wire drawing machine when not in use is essential because it will save energy and resources. Not powering off the wire drawing machine will make it less efficient and lead to damage in the long run.In addition, pay attention to rain and moisture.
The above are some maintenance about the wire drawing machine, if you have better ideas, please contact:sunman@brwiremachine.com
