During the whole working process of the wire drawing machine, the failure that often occurs is that the speed of the wire drawing is very unstable, sometimes fast and sometimes slow, so that the wire drawn by the wire drawing machine is intermittent or irregular. These situations are mainly due to the following reasons：
1. It is related to the parts on the wire drawing machine. Any problem with any part will affect the drawing effect.
2. When the copper wire vibrates on the annealing wheel, the speed will also be unstable. Because the copper wire is annealed when it is fast or slow, it will cause defects on the surface of the copper wire.
3. The gear box of the main motor is severely worn due to long-term use, which will also cause the wire drawing machine to fail to match normally between the speed of the fixed speed wheel, the speed of traction and the speed of winding, and eventually a single The case of thin silk
4. The tension of the wire drawing machine is unstable on the wire storage wheel. The main reason is that the air pump in the wire drawing machine is unstable in terms of air pressure, which makes the tension of the wire drawing machine unable to be constant.
If you have a better idea, you can send an email to sunman@brwiremachine.com
